p r o g r a m I S O _ 1 9 9 0 5 _ 1 w32 version 00.11
———————————— at 16:26:19 on 14-JUL-2025
jackup leg penetration assessment during preload according to ISO 19905-1 (2016)
(c) S.Kay Consultant, Leiderdorp, The Netherlands.
Please read the ISO_19905_1 Users Manual [ref SKA/MAN/001]
and the ISO_19905_1 FAQ File [ref SKA/FAQ/001].

001_001

iso_19905_1: nlines_errors : 4
iso_19905_1: nlines_warnings: 3

ERROR. spfdat: SPGEOM = “15.0 10.0 110.0 183.0 0 0 “SILT””
ERROR. spfdat: SPGEOM must be “CIRCULAR”
readn1: input conversion error
ERROR. spfdat: card 3.6 SPUDCAN_MAT.

WARNING. spfdat: spudcan volume V_SPUDCAN=21 m^3 is outside typical range [30 – 500].
WARNING. spfdat: maximum spudcan preload P_SPUD=27.50 kN is outside typical range [10e3 – 100e3].
WARNING. spfdat: NUMSP_BH > 10 [?simplify spudcan geometry].

iso_19905_1: fatal error(s). STOP.

p r o g r a m I S O _ 1 9 9 0 5 _ 1 w32 version 00.11
———————————— at 16:26:19 on 14-JUL-2025
jackup leg penetration assessment during preload according to ISO 19905-1 (2016)
(c) S.Kay Consultant, Leiderdorp, The Netherlands.
Please read the ISO_19905_1 Users Manual [ref SKA/MAN/001]
and the ISO_19905_1 FAQ File [ref SKA/FAQ/001].

pidata:

gmdata:

spfdat: 10 [?simplify spudcan geometry].

iso_19905_1: fatal error(s). STOP.